Table of Contents
Advertisement
Field Name
Obtain an IP address auto-
matically
Option 60 Vendor ID
Option 61 IAID
Option 61 DUID
Option 77 User ID
Option 125
Option 50 Request IP Address Select to request a specific IP address when sending messages. If the address is not avail-
Option 51 Request Leased
Time
Option 54 Request Server
Address
Use the following Static IP
address
WAN IP Address
WAN Subnet Mask
WAN gateway IP Address
Advanced DMZ
Non DMZ IP Address
Non DMZ Net Mask
IPv6 settings section
The following fields appear when either IPv6 Only or IPv4&IPv6 (Dual Stack) network protocol values is selected on the
WAN Service Configuration page.
Obtain an IPv6 address auto-
matically
Dhcpv6 Address Assignment
(IANA)
Dhcpv6 Prefix Delegation
(IAPD)
Use the following Static IPv6
address
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
When you wish the ISP to automatically assign the WAN IP to the gateway.
( Optional ) Broadcast a specific vendor ID for the DHCP server to accept the device.
( Optional ) Interface Association Identifier (IAID). A unique identifier for an IA, chosen by the
client.
( Optional ) DHCP Unique Identifier (DUID) is used by the client to get an IP address from the
DHCP server.
( Optional ) Enter the user class ID that should be used to filter traffic.
( Optional ) Select whether to enable local devices to automatically receive DHCP options
from the server.
able, the DHCP server assigns the next allowed IP address.
Select to request the maximum lease time defined for the client.
Select to request the IP address of the source server.
Select this option to manually declare the static IP information provided by your ISP.
If using a static IP address, enter the static WAN IPV4 Address.
If using a static IP address, enter the static Subnet Mask.
If using a static IP address, enter the static Gateway IP address.
( Optional ) Select this option to enable Advanced DMZ on the WAN service.
If using the Advanced DMZ feature, you can enter a specific vendor ID that will be broadcast
for the DHCP server to accept the device, y. e.g., 192.168.2.1..
If using the Advanced DMZ feature, you can enter a secondary LAN IP address for the gate-
way. The default is 255.255.255.0 .
Enables the DHCPv6 Client on this WAN interface. Select this option when you want the ISP
to automatically assign the WAN IP to the gateway.
Select this option for the CPE to receive WAN IP from ISP.
This option is selected by default and enables the CPE to generate the WAN IP's prefix from
the server's REST by MAC address.
Select this option to manually declare the v6 Static IP information provided by your ISP. In
WAN IPv6 Address/Prefix Length
the
field, enter the IP address / prefix length. If you do
42
Advertisement
Table of Contents
