Table of Contents
Advertisement
To learn more about what is being tested and what actions to take when a test fails, click the
each line item.
3. To test at the VP level in lieu of at an individual VC connection, click
bands in the
Test your Wireless Connection
4. To view information about other connections, click the
through them.
Ethernet OAM
On this page, you can view diagnostics regarding your VDSL PTM or Ethernet WAN connection. Fault Management is compliant with
IEEE 802.1ag for Connectivity Fault Management.
1. In the left navigation bar, click
2. To enable
Ethernet Link OAM
a. Click the Enabled checkbox. Additional fields appear.
b. Modify the fields as needed, using the information in the
3. To enable
Ethernet Service OAM
a. Click the Enabled checkbox. Additional fields appear showing values for 802.1ag. To configure Y.1731, click the
Y.1731
radio button. The page refreshes.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
row.
Next Connection
Diagnostics
>
Ethernet
OAM. The following page appears.
(802.3ah):
(802.1ag/Y.1731):
Test With OAM
F4. Status is shown for both wireless
and
Previous Connection
Ethernet Link OAM (802.3ah)
Help
link at the far right of
buttons to navigate
section of the table below.
126
Advertisement
Table of Contents
