Table of Contents
Advertisement
1. In the left navigation bar, click
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Interface
Available WAN interfaces.
Select the applicable Routing Interface Protocol version. Options are 1 , 2 , and Both . The
Version
default is 2 .
Operation
This option is set to Passive and cannot be changed. This mode listens only. It does not advert-
ise routes.
Enabled
Click the checkbox to employ RIP on the displayed interface.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Advanced Setup
>
Routing
> RIP. The following page appears.
79
Advertisement
Table of Contents
