Table of Contents
Advertisement
SNMP Agent
On this page, you can configure the SNMP (Simple Network Management Protocol) settings to retrieve statistics from the SNMP agent
for the gateway. You can enable or disable the SNMP agent and set parameters such as the read community, system name and trap
manager IP.
1. In the left navigation bar, click
2. To enable SNMP, click
3. Modify the other fields as needed, using the information in the following table.
4. Click
Save/Apply
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Read Community
Set Community
System Name
System Location
System Contact
Trap Manager IP
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Management
>
SNMP
Enable
in the
SNMP Agent
field.
Description
The options are public and private. The default is public .
The options are public and private. The default is private .
The name of the system.
( Optional ) The location of the system.
( Optional ) The contact for the system.
( Optional ) The IP address where the trap manager is installed.
Agent. The following page appears.
136
Advertisement
Table of Contents
