Table of Contents
Advertisement
2. Modify the settings as needed, using the information supplied by your provider and that supplied in the table below.
3. Click Apply/Save.
The fields on this page are explained in the following table.
Field Name
Select DNS Server Interface
from available WAN inter-
faces
Use the following Static DNS
IP address
Obtain IPv6 DNS info from a
WAN interface
Use the following Static
IPv6 DNS IP address
Dynamic DNS
Dynamic DNS (DDNS) automatically updates a name server in the DNS with the active DNS configuration of its configured hostnames,
addresses or other data. Often this update occurs in real time. On this page, you can configure the settings for this feature.
1. In the left navigation bar, click
2. Enter your desired settings.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
Selected DNS Server Interfaces
Select entries in the
Interfaces
columns and click the arrows to move them left or right. At
least one entry must remain in the
column.
Click to use static DNS IP addresses. Then, enter the IP addresses of the
Primary
Secondary
and
DNS servers.
This option is selected by default. Change the value in the
selected
field only for IPv6 environments.
Click to use static DNS IP addresses. Then, enter the IP addresses of the
Primary
Secondary
and
IPv6 DNS servers.
Advanced Setup
>
DNS
Available WAN
and
Selected DNS Server Interfaces
WAN Interface
>
Dynamic DNS
and then click Add. The following page appears.
81
Advertisement
Table of Contents
