Table of Contents
Advertisement
Field Name
Enable Firewall
Enable SYN Flood rules
IGMP Multicast
section
Enable IGMP Multicast
Proxy
Enable IGMP Multicast
Source
MLD Multicast
section
Enable MLD Multicast Proxy Click to enable Multicast Listener Discovery (MLD) multicast. Used by IPv4 hosts to report mul-
Enable MLD Multicast
Source
MTU size
Use Base MAC Address on
this WAN interface
8. Click Next. The following page appears where you will select the interface used as a default gateway used for the PPP ser-
vice being created.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
This option enables functions in the
checkbox to disable this option.
Select to enable rules for preventing SYN flood distributed denial of service attacks.
Click to enable Internet Group Membership Protocol (IGMP) multicast. Used by IPv4 hosts to
report multicast group memberships to any neighboring multicast routers.
Select to enable this service to act as an IGMP multicast source.
ticast group memberships to any neighboring multicast routers.
Select to enable this service to act as an MLD multicast source.
Enter the MTU (Maximum Transmission Unit) size for SmartRG gateways supporting a gigabit-
capable WAN interface. Options are 1370 - 1492 bytes . The default is 1492 bytes.
Use the SmartRG Devices Base (Primary) MAC address. When unchecked, a unique MAC is
assigned for each service.
Security
sub-menu and is enabled by default. Click the
35
Advertisement
Table of Contents
