Installing Your Sr400Ac Gateway - ADTRAN SMART/RG SR400ac User Manual

Installing your SR400ac Gateway

1. Connect a LAN port on the SmartRG gateway to a PC using an Ethernet cable.
2. To connect a broadband device (such as a cable modem):
a. Connect one end of an Ethernet cable to the WAN port on the SmartRG gateway and connect the other end of the
cable to the broadband modem.
b. Connect one end of the supplied silver cable to the broadband modem and connect the other end of the cable to the
wall jack installed by your provider.
3. Plug the power adapter to the wall outlet and then connect the small end of to the Power port on the back of the gateway.
4. Turn on the unit by pressing the Power button on the side of the gateway.
The gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before
you can begin using your Internet applications (browser, email, etc.).
If connection to the Internet is unsuccessful, verify that all cable connections are in place and the gateway's power is turned on.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021 9