Network Settings - ADTRAN SR700ac User Manual

Field Name
LTE Information section
Network Connected Status
Signal Quality
RSSI
IPv4 Address

Network Settings

On this page, you can configure the Network Settings of the LTE connection between your provider and your gateway.
1. Insert the SIM card received from your network provider into the SIM card slot on the back of the SR700ac with the gold con-
tacts facing up.
Note: The SIM card slot is located beneath the black WAN Ethernet port on the back of the gateway.
2. In the left navigation bar, click
3. Modify the settings as needed, using the information provided in the table below.
4. Click Save/Apply to commit your changes.
Note: The settings take up to 90 seconds to save.
The fields on this page are explained in the following table.
Field Name
Network Mode
section
Network Dial Mode
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Description
identify the subscriber of the network provider.
State of the LTE connection. Options are 4G Connected , 3G Connected , Disconnected , Not
Attached , and SIM Card not detected .
Quality of the LTE signal. Options are Excellent , Average , Poor , and No Signal .
Received Signal Strength Indicator. The measured dBm level of the received radio signal with the
network provider.
IPv4 Address for the LTE connection.
LTE WAN Service > Network
Description
Select the Network Dial Mode. Options are 4G/3G Auto , 4G Only , and 3G Only .
Settings. The following page appears.
99