Table of Contents
Advertisement
b. Modify the fields, using the information provided in the
below.
4. Click
Apply/Save
to commit your changes.
5. To run a loopback test, enter a MAC address in the
results appear in the
6. To run a linktrace test, enter a MAC address in the
results appear in the
The fields on this page are explained in the following table.
Field Name
Description
Ethernet Link OAM (802.3ah)
WAN Interface
Select the WAN interface that you want to test.
OAM ID
Enter the ID of this OAM configuration. Only positive numbers are allowed.
Auto Event
Click to enable automatic reporting of events.
Variable Retrieval
Click to enable on-demand link diagnostics, including bit-error-rate approximation.
Link Events
Click to enable reporting of critical conditions that may cause link failure.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
Loopback Result
row of the table.
Linktrace
Result row of the table.
section
Ethernet Service OAM (802.1ag/Y.1731)
Target MAC
field and click
Send Loopback
Target MAC
field and click
Send Linktrace
section of the table
at the bottom of the page. The
at the bottom of the page. The
127
Advertisement
Table of Contents
