Call Log Setup; Switch Visual Ring On/Off; Using Self Test; Selecting The Display Mode - Avaya IP Office 2420 User Manual

2420 Options

Call Log Setup

Switch Visual Ring On/Off

Using Self Test

Selecting the Display Mode

2420 User Guide
IP Office
Through the Option menu you can specify which types of calls should be
included in the 2420's call log. See "Setting Which Calls are Logged" on
page 14.
With visual ringing on, the phones lamp flashes when the phone is ringing.
1. Press Option. If
current screen.
2. Press Visual Ring. A menu showing the current setting appears.
3. To change the current setting, either press the
setting or press
4. Do one of the following:
•
To save the setting and return to the options menu, press
Save. You will hear a confirmation tone.
•
To return to the options menu without saving any changes, press
Cancel.
•
To return to the call handling screen without saving any changes,
press .
Self test can be used to display information about the phone and to check
operation of the lamps and display. The information may be required by a
telephone system maintainer.
1. Press Option. If
current screen.
2. Press Self Test. The a screen of information appears.
3. Press and hold the
and all the phone lamps should come on.
4. Do one of the following:
•
To return to the options menu, press
•
To return to the call handling screen, press
See "Display Mode" on page 21.
Option is not shown press
Yes/No.
Option is not shown press
Test key. The screen lines should all go black
40DHB0002USEG - Issue 1 (29/04/2003)
Page 17
to exit the
key next to the
to exit the
Done.
.
Page 17