Set Ip Routing - 3Com 3C421600A Reference Manual

144 C 4: R
HAPTER OUTER

set ip routing

C R
OMMAND EFERENCE
autonomous_system_number [number]
metric_maximum_entries [number]
rip_flags [metrics, send_request]
router_id [IP_address]
Sets global parameters for IP routing on the specified IP router address
that serves as the gateway to an autonomous system.
IP routing must be disabled before setting these values.
An autonomous system is a connected group of networks run by one or
more network operators that has a single and clearly defined routing
policy. An autonomous system number is a unique identifier for such a
system, but is not currently supported by the RAS 1500. The maximum
number of IP routes that can be contained in the Routing Table is 10.
Parameter
autonomous_system_number
metric_maximum_entries
router_id
rip_flags
Description
Value associated with a protocol not currently
supported. Disregard this value. Range: 1-65535.
Most next hop entries the Next Hop Hash Table can
hold. Default: 512. Range: 256-65535.
IP address of the RAS 1500. If the value is not
specified, the system uses a user-configured
internal IP address for this value, or the eth:1
value if no internal value is specified.
Flags indicate at which level a RIP instance is
disabled or configured. Choices:
Metrics - Specifies how to increment metrics
using RFC1058.
Send_request - Sends a RIP request for routing
data when an interface first comes up.