Disable User <User_Name; Disconnect Command; Disconnect User <Name; Do Command - 3Com 3C421600A Reference Manual

88 C 4: R
HAPTER OUTER
disable user
<user_name>
Disconnect
Command
disconnect user
<name>

Do Command

do <command_
inputfile>
output <outputfile>

Enable Commands

enable accounting

enable
authentication
local | remote
C R
OMMAND EFERENCE
Parameter Description
escape All Telnet clients are prevented from using the escape
character during a session.
Disables the specified user from being used. This affects dial-in users and
WAN connections that depend on that user for parameters. It also causes
all active sessions established using that particular user to terminate and
does not allow any new sessions to occur using that username. Disabling
a user is useful when prohibiting a user access temporarily. Use list
users and show user commands to view edits.
Brings down the specified user connection.
Runs a script file, stored in FLASH memory, which contains a series of CLI
commands. The output parameter is optional.
Enables remote accounting via RADIUS or TACACS+. Use the disable
accounting command to halt accounting via RADIUS. Use the show
accounting command to view edits.
Permits the following types of authentication:
Local — User authentication based on a password specified in the
User Table. Local authentication is enabled globally by default.
Local authentication takes precedence over remote authentication.
Remote — Authentication based on a password specified in a RADIUS
or TACACS+ server.