Set Modem_Group <Name - 3Com 3C421600A Reference Manual

148 C 4: R
HAPTER OUTER
set modem_group
<name>
C R
OMMAND EFERENCE
Parameter
<preference_number> Defines preferred rank in which a login host is used (from
rlogin_port
telnet_port
clearTCP_port
access [dial_in | dial_out | two_way]
clid security [off | on]
connection_type [direct_conn | direct_net | no_prompt |
normal | prompt_user_only]
dial_prefix <string>
host_addresss <ip_address or address>
host_type [prompt | select | specified]
init_script <init_script_name>
login_service [cleartcp | rlogin |telnet]
message <string>
password <password>
prompt <string>
protocol [arap | PPP | slip]
tcp_port <port>
type [login | login_network | network]
user_name <user_name>
Configures a previously defined modem group. All the interfaces in the
specified modem group are configured with this one command.
Note: All the parameters that can be set with this command can also be
configured using set switched interface , but this command sets
multiple interfaces with one command. Issue the show interface
settings command to view configuration.
Description
first preference of 1 to least preference of 10). Use list
login_hosts to see the preference number associated
with a login host.
TCP port number you wish to configure for RLOGIN access
to the login host. If you do not specify it here, and the user
does not specify the TCP port from the CLI rlogin
command, the default is 513. Limit: 65535. Default: 513.
TCP port number you wish to configure for Telnet access to
the login host. If you do not specify it here, and the user
does not specify the TCP port from the CLI telnet
command, the default is 23. Limit: 65535. Default: 23.
TCP port number you wish to configure for ClearTCP access
to the login host. There is no default TCP port number.
Limit: 65535. Default: 6000.