Set User Commands; Set User <User_Name - 3Com 3C421600A Reference Manual

160 C 4: R
HAPTER OUTER

Set User Commands

set user <user_name>
C R
OMMAND EFERENCE
Set user commands allow you to change the configuration of the
following user profiles.
alternate_phone_number <phone_number>
callback_delay <0-60>
callback_type [dynamic | normal]
caller_ID1 <phone_number>
caller_ID2 <phone_number>
expiration <date>
idle_timeout <0-86400>
input_filter <filter_name>
message <string>
modem_group <name>
output_filter <filter_name>
password <password>
phone_number <phone_number>
session_timeout <0-86400>
type [login,network,callback,dialout,manage]
Modifies parameters most of which were configured by the add user
command.
Parameter
<user_name>
alternate_phone
_number
callback_delay
callback_type
caller_id1
caller_id2
expiration
idle_timeout
Description
Name of user, previously defined using add user. Limit: 32 ASCII
characters.
Number to dial if the first number is busy. Limit: 33 ASCII
characters. Note: This value is overridden when a dial-out script
specified in the set dialout user command is issued.
The interval between dropping the incoming call and initiating
the call-back. Default: 0 Range: 1 - 60 seconds.
Type of call-back:
dynamic — The call-back phone number changes based on
the phone number from which the client called.
normal — The call-back phone number does not change.
The number that the ANI of an incoming call must match to
allow the call. If there is no match to caller_id1 or caller_id2, the
call is dropped. Used when clid security is enabled.
Date after which this user becomes inactive. The format is the
following: DD-MMM-[YY]YY. Month is the first 3 letters of the
month. Year is either 2 or 4 digits, for example, 96 or 1996.
Interval to wait before timing out an inactive connection.
Default: 0 (not activated). Range: 1 - 86400 seconds. Note:
change the default to configure this value.