Show Packet_Logging Or Show Packet_Logging Settings; Show Ping Or Show Ping Settings; Show Ping Row <Row_Number> Counters - 3Com 3C421600A Reference Manual

200 C 4: R
HAPTER OUTER
show packet_logging
or show
packet_logging
settings
show ping or show
ping settings
show ping row
<row_number> or
show ping row
<row_number>
settings
show ping row
<row_number>
counters
C R
OMMAND EFERENCE
Displays settings for packet size and logging. See the set
packet_logging command for more information.
Example:
PACKET LOGGING SETTING
Logging Packet Type:
Logging Packet Size:
Displays general ping settings you specified using the ping and set
ping maximum_rows commands.
Example:
Maximum Rows in Table
Displays settings for the specified row in the Remote Ping Table. Range:
1-1000. These settings reflect the configuration you specified using the
ping command.
Example:
PING SETTINGS for ROW: 1 DESTINATION:
ilysium
Status:
Resolved IP address:
Count:
Interval
Size:
Timeout:
Self Destroy Delay:
Displays counters for the specified row in the Remote Ping Table. These
settings reflect the configuration you specified using the ping command.
This command displays the following:
Status — Present state of this row. Possible states include notReady,
notInService, and active.
Count — Number of pings to be transmitted in this sequence.
Requests Sent — Number of pings sent when this row became active.
NONE
0
20
ACTIVE
155.155.121.143
100
1
64
20
10