Set Dhcp Mode; Set Dhcp Proxy [Server1 | Server2]; Set Dhcp Relay [Server1 | Server2] - 3Com 3C421600A Reference Manual

set dhcp mode

set dhcp proxy
[server1 | server2]
set dhcp relay
[server1 | server2]
[disabled relay server proxy]
Displays the three DHCP modes available to choose from to set in the RAS
1500: disabled, relay, or server.
Note: The RAS 1500 can be set to use DHCP as a relay or a server, but
never as both simultaneously.
Parameter Description
disabled Disables DHCP in the RAS 1500.
relay Sets the RAS 1500 to implement DHCP as a relay. As a relay, the
RAS 1500 passes on a DHCP request for IP information from a
local user to a DHCP server.
server Sets the RAS 1500 to implement DHCP as a server. As a server, the
RAS 1500 receives a request for IP information from a local user,
processes the request and provides the IP information directly to
that user.
address <ip_address>
Sets the RAS 1500 to implement DHCP as a proxy. As a proxy, the RAS
1500 initiates a DHCP request to the DHCP server on behalf of the DHCP
dial-in clients. The DHCP server processes the request and sends the IP
information back to the dial-in user via the RAS 1500.
Parameter
server1
server2
address
address <ip_address>
enabled [no | yes]
max_hops
Description
The primary DHCP server that receives and processes
the request for IP information.
The secondary DHCP server that receives and processes
the request for IP information if the primary server is
busy or unavailable.
IP address of the DHCP server.
Set Commands 129