3Com 3C421600A Reference Manual page 163

set dialout user
<username> site
These values override phone or alternate phone numbers specified in the
set user command.
Parameter Description
<user_name> Name of user, previously defined using add user command
with dial-out as the type. Limit: 32 ASCII characters.
local_IP_address IP address of the user making an IP connection over this
dial-out interface.
send & reply Specify commands required to establish and terminate the
scripts remote connection. Scripts must be enclosed in double
quotes if more than 64 ASCII characters. Limit: 240 ASCII
characters.
address_selection [assign | negotiate | specified]
appletalk [enable | disable]
bridging [enable | disable]
default_route_option [enable | disable]
end_time [time]
ip [enable | disable]
ipx [enable | disable]
ipx_address [IPX_address]
range_appletalk_address [1-65279]
remote_ip_address [IP_name or network address/mask_specifier]
send_password [string]
spoofing [enable | disable]
start_time [time]
type [ondemand | timed | continuous | manual]
Sets parameters for dial-out users connecting to a remote network.
Parameter
<username>
address_selection
appletalk
Description
Name user, previously defined using add user with dial-out
as the type. Limit: 32 ASCII characters.
Determines how the IP address is assigned for incoming
(client) IP network connections.
Negotiate — brokers IP address between remote client
and local user.
Assign — chooses address from IP pool, configured
using set ip system. Default.
Specified — must use IP address set in
remote_IP_address value.
Indicates whether the connection supports Appletalk. Set to
either Enable or Disable. Default: Enable.
Set User Commands 163