3Com 3C421600A Reference Manual page 157

message String to display to a dial-in user when connection is set. Limit:
64 ASCII characters.
You can use $value to stipulate more parameters in the
message line for identification purposes.
Note: The message, if it includes spaces, must be enclosed in
quotations. Use the show user command to view the
message as configured. See Chapter 2, "Administrative
Tools," for more information.
output_filter File name of filter screening outgoing data.
prompt String to present the dial-in user. Default: login. Limit: 64 ASCII
characters.
password Used if connection_type is no_prompt or prompt_user_only.
Limit: 63 ASCII characters.
protocol Protocol (PPP) to connect with, if connection type is direct_net.
SLIP is not supported by direct_net connection type. Default:
PPP.
tcp_port TCP port number for login host. Value used for direct_conn or
direct_net connection types. Limit: 65635.
type Type of connections to allow on the switched interface.
user_name Designation for the switched interface, used if connection type
is no_prompt. Limit: 64 ASCII characters.
$date — current date according to system uptime.
$callid — User call identification according to system
uptime.
$port — port occupied by user. The format of each port is
the following:
x/slot:y/mod:z
where x is the type of unit (rm0 for the RAS 1500 unit;
pem0 or pem1 for the RAS 1500 Expansion Unit), y is the
slot number, and z is the port (modem) number.
Example: rm0/slot:1/mod:1,pem0/slot:1/mod:2
$hostname — User host name.
$sysname — User system name (same as hostname).
$time — Time of call according to system uptime.
Login port allows login users only.
Network port allows network users only.
Login_network allows either type. Default.
Set Commands 157