List Appletalk Routes; List Appletalk Zones - 3Com 3C421600A Reference Manual

98 C 4: R
HAPTER OUTER

list appletalk routes

list appletalk zones

C R
OMMAND EFERENCE
Initializing
Configuring
Enabling
Enabled
Disabling
Disabled
Invalid
Terminating
Type — Static or dynamic.
Network Address — Address range of this entry.
Displays the entries in the AppleTalk routing table. The table lists the
following:
Address Range — Range of addresses used on this route.
Next Hop — AppleTalk address of the next hop router. The entry 0.0
implies the entry is a local network.
Port — Address of the network (route destination).
Hops — How many hops away this network is.
Type — AppleTalk, PPP, Serial-Non Standard, or Other.
State — Condition of the path to this network, listed from best to
worst: good, suspect, pretty bad, bad. The state of this network
worsens when networking packets from that network fail to arrive.
The more packets are missing, the worse the state is.
Displays all the AppleTalk zones configured for the entire system. It lists
the following:
Name — Zone name you defined using add appletalk zone.
Addr Range — Range of addresses used in this zone.
State — State of the zone.
Port — Interface the zone runs over.
From — Address of the router from which the zone and network was
learned.