Set Bridge; Set Cleartcp Connect_Message <Message String - 3Com 3C421600A Reference Manual

126 C 4: R
HAPTER OUTER

set bridge

set clearTCP
connect_message
<message string>
C R
OMMAND EFERENCE
Parameter Description
primary_port RADIUS destination port for the primary authentication server.
Default: 1645. Range: 0 - 65,535.
primary_secret Password of the Primary RADIUS server. Limit: 16 ASCII
characters. Null string: ""
primary_server IP address or name of the initial server to exchange
authentication data with.
retransmissions Maximum number of times to retransmit packets to one or
both servers if transmissions fail. Default: 10. Range: 0-100.
Value of 0 infinite retries. We recommend you do not set to 0.
secondary_port RADIUS destination port for the secondary authentication
server. Default: 1645. Range: 0 - 65,535.
secondary_secret Password of the Secondary RADIUS server. Limit: 16 ASCII
characters. Null string: ""
secondary_server IP address or name of the second server to exchange
authentication data with.
timeout Interval in seconds between retransmissions. Default: 3
seconds. Range: 1-60.
type The type of server, either RADIUS (default) or NOS.
aging_time
forward_delay
spanning_tree_priority
Sets parameters for all bridge networks.
Parameter Description
aging_time Interval to wait before aging out MAC addresses that were
learned from other LAN segments. The default is 300.
forward delay Interval that bridge waits before bridging packets. This time is
useful for the bridge to listen to packets, look at the MAC
addresses, and build a MAC address table. Default is 15
seconds.
spanning_tree_ Priority number determines who is seen as the "root" bridge
priority in a bridge network. The default is 32768.
Configures the string that is sent to ClearTCP clients, when the TCP
connection is established. The message string must be enclosed in
quotes. The limit is 64 ASCII characters. See the conventions below to
follow when composing the message.
If the string is surrounded by double quotes, you can insert an escape
character '\' inside the quoted string. If the string is followed by the