3Com 3C421600A Reference Manual page 259

Event Message Examples 259
"CIP: The modem group %s already exists /n"
Meaning: The administrator tried to configure a modem group, but the
modem group already exists
Action: Choose another modem group name
User Manager "AUTH: Unable to authenticate if both authentication IP's are set
Messages to 0"
Meaning: The user may not be defined locally, remote authentication is
not enabled, or a remote authentication IP address is not configured
Action: Define the user locally or configure a RADIUS server IP address
"AUTH: Unable to account if both accounting ip's are set to 0"
Meaning: Remote accounting is enabled, but no RADIUS accounting
server IP addresses have been configured
Action: Either disable remote accounting or configure a RADIUS
accounting server IP address
"AUTH - Most likely client/server configuration mismatch"
Meaning: The RADIUS secret configured on RAS 1500 does not match
the secret configured on the RADIUS server, or an invalid RADIUS server is
trying to contact RAS 1500
Action: Ensure the secret is identical on RAS 1500 and RADIUS server
Filter Manager "FM: In filter file <name> had no rules for <protocol> protocol"
Process Messages
Meaning: A filter protocol section is defined, but there are no rules
associated with it.
Action: A protocol section must either contain at least one rule, or be
commented out for the syntax to be valid