Router Command Overview - 3Com 3C421600A Reference Manual

3
Command Format
R C
OUTER
This chapter contains the following information:
Command Format
Entering Commands
Command Language Structure
Many commands are position-independent and multitiered and use
keywords. Multitiered commands let you type the base command (for
example, set interface) and implement many more parameters
(host_type, host_address, etc). Position independence does not require all
parameters to be specified at once, nor in sequence, to work. But typing
a keyword in the base command such as network in set ip network
is mandatory to enable the command. Command syntax is shown in the
example below:
add ip network <network_name>
address [IP address]
{enabled [no | yes] }
{frame [ethernet_II, snap] }
{interface [rm0/eth:1] }
add ip network is the command; <network_name> the required
value
address is a required parameter; [IP address] the value for the
IP address
{enabled} is the network "on" value; choices: [no or yes]
{frame} is the encapsulation type; choices: [ethernet_ii or
snap]
interface is the LAN connection - rm0/eth:1
OMMAND
O
VERVIEW