3Com 3C421600A Reference Manual page 190

190 C 4: R
HAPTER OUTER
C R
OMMAND EFERENCE
Example:
rm0/slot:1/mod:1).
This command displays the following:
INPUT COUNTERS
Octets — Number of bytes received.
Ucast — Number of Unicast packets received.
MultiCast — number of multicast packets received.
BroadCast — Number of broadcast packets received.
Discards — Number of inbound packets that were chosen to be
discarded even though no errors had been detected to prevent their
being deliverable to a higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.
Errors — For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being deliverable
to a higher-layer protocol. For character-oriented or fixed-length
interfaces, the number of inbound transmission units that contained
errors preventing them from being deliverable to a number of inbound
transmission units that contained higher-layer protocol.
Unknown Prot — Number of unknown protocols in packet.
OUTPUT COUNTERS
Octets — Number of bytes transmitted.
Ucast — Number of Unicast packets transmitted.
MultiCast — Number of multicast packets transmitted.
BroadCast — Number of broadcast packet transmitted.
Discards — Number of outbound packets that were chosen to be
discarded even though no errors had been detected to prevent their
being transmitted. One possible reason for discarding such a packet
could be to free up buffer space.
Errors — For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors. For
character-oriented or fixed-length interfaces, the number of outbound
transmission units that could not be transmitted because of errors.
Out QLen — Length of the output packet queue (in packets).