Show Authentication Or Show Authentication Settings; Show Authentication Counters - 3Com 3C421600A Reference Manual

174 C 4: R
HAPTER OUTER
show authentication
or
show authentication
settings
show authentication
counters
C R
OMMAND EFERENCE
Displays the RADIUS and local user authentication settings, which you
can modify using the set authentication command. It lists the
following:
Local Authentication is
Remote Authentication is
Primary Server is
Primary Server Port is
1645.
Secondary Server is
Secondary Server Port is
Default: 1645.
Retransmission Timeout
3 seconds.
Max Retranmissions
reported. Default: 10 seconds.
AUTHENTICATION SETTINGS
Local Authentication is
Remote Authentication is:
Hint Assigned is:
Primary Server is
Primary Server Port is
Secondary Server is:
Secondary Server Port is:
Retransmission
Max Retranmissions:
Displays the RADIUS and local user authentication counters. It lists the
following:
Local Successful Authentications
pair matched.
Local Failed Authentications
did not match.
Remote Successful Authentications
accepted the user on this server.
Remote Failed Authentications
user on this server.
Enabled (default)/Disabled.
—
Enabled (default)/Disabled.
—
IP address of the primary RADIUS server.
—
Port number of the primary server. Default:
—
IP address of the secondary RADIUS server.
—
Port number of the secondary server.
—
Interval between retransmissions. Default:
—
Number of retransmissions before failure
—
Timeout:
Number of times user/password
—
Number of times user/password pair
—
—
Number of times RADIUS rejected
—
ENABLED
ENABLED
DISABLED
122.122.122.134
1645
0.0.0.0
1645
3
10
Number of times RADIUS