Set Network User <Name - 3Com 3C421600A Reference Manual

166 C 4: R
HAPTER OUTER
set network user
<name>
C R
OMMAND EFERENCE
address_selection [assign | negotiate | specified]
appletalk [disable | enable]
bridging [diable | enable]
default_route_option [disable | enable]
filter_zones [disable | enable]
header_compression [none | tcpip]
ip [disable | enable]
ip_routing [both | listen | none | send]
ipx [disable | enable]
ipx_address [address]
ipx_routing [all | listen | none | respond | send]
ipx_wan [disable | enable]
mtu <0-8192>
nat_option [disable | enable]
network_service [arap | fcp | fcp | fr_1490 | ppp |slip]
pat_default_address <ip_address>
range_appletalk_address <ap_add_range>
remote_ip_address <Ip_name or net_address
rip [ripv1 | ripv2]
rip_authentication_key <string>
rip_policies_update <rip_policies>[send_default | send_routes
| send_subnets | accept_default | split_horizon |
poison_revere | flash_update | send_compat | ripv1_receive |
ripv2_receive | silent]
send_password <password>
spoofing [disable | enable]
transmit_authentication <name>
Specifies parameters for IP users whose type is network.
Parameter
name
address_selection
appletalk
bridging
Description
name of the user, whose type must be network.
Specifies the method by which an IP address is assigned
to the client:
assign — Selects addresses from the IP address pool.
negotiate — Brokers an IP address between the local
remote client and the RAS 1500. This option is not
available with SLIP.
specified — The administrator sets the IP address,
using the remote_ip_address parameter.
Enables or disables the AppleTalk protocol. Default:
Enable.
Enables or disables bridging. Default: Enable.