3Com 3C421600A Reference Manual page 262

262 A D: E M
PPENDIX VENT ESSAGES
IP Dial-out Process "INIT: Could not allocate a private data area. Status: <error
Messages status>."
Meaning: The dial-out process could not allocate enough memory for its
data. The dial-out process will not be started
Action: Free some memory, for example, delete some users. Once some
memory has been freed, save the configuration and reboot the system
"Could not register socket <socket> with the IP forwarder. Status:
<error status>(<error value>)."
Meaning: The dial-out process failed to register its socket with the IP
forwarder. The IP dial-out service will not be started
Action: Ensure the IP forwarder process is running by using the list
processes command. Ensure that there is an IP network defined.
Reboot the system and re-enable the dial-out service
"Could not unregister socket <socket> with the IP forwarder.
Status: <error status>(<error value>)."
Meaning: The dial-out process failed to unregister its socket with the IP
forwarder. This message is displayed only when disabling the dial-out
network service
Action: When the IP dial-out service reaches this state, it cannot be
enabled again without rebooting. Reboot the system
"Could not register the IP Dial-out service with SAP. Status: <error
status>(<error value>)."
Meaning: The dial-out process failed to register the IP dial-out service
with the SAP process. The IP dial-out service will not be started
Action: If the dial-out service is enabled, disable the dial-out service and
re-enable the dial-out service. If message is displayed again, reboot the
system