Set Network Service <Admin_Name - 3Com 3C421600A Reference Manual

set network service
<admin_name>
type Specifies type of connection allowed on interface.
Login port only allows login users.
Network port only allows network users.
Login_network allows either type. Default.
user_name Designation for the switched interface, used if connection type is
no_prompt. Limit: 64 ASCII characters.
close_active_connections [true | false]
data [string]
server_type [service_name]
socket [socket_number]
Sets parameters for network services you configured with the add
network services command. You can list the configured network
services using list network services. Service must first be
disabled for this command to work. For DialOut service, the only Data
value supported is modem_group (and this value must be used when
implementing DialOut service). See add network services
command for more information on Data parameters.
Parameter Description
<admin_name> Designation you assigned to network service with the add
network service command. Limit: 64 ASCII characters.
close_active_ Indicates whether to close any active connections when a service
connections is shut by disable network_service.Default: False.
data Telnet and ClearTCP Ancillary Data. This field contains
server-specific configuration data. See table that lists the
configurable ancillary data parameters in the add network
service command.
server_type Type of network service you wish to assign to this administration
name. Available services:
ClearTCPD - daemon enables access to a modem group on
socket 0. Uses TCP.
DialOut - supports dial-out connections to IP hosts on socket
32773. Uses TCP.
SNMPD - daemon supports SNMP on socket 161. Uses UDP.
TFTPD - daemon supports file transfer service on socket 69.
Uses UDP.
TELNETD - daemon supports Telnet, either to the CLI or a
modem group on socket 23. Uses TCP.
Set Commands 151