Set Authentication - 3Com 3C421600A Reference Manual

set authentication

Sets parameters for all AppleTalk networks, including the following:
Parameter
<network name>
aarp_gleaning
current_zone
ddp_checksums
default_zone
description
desired_mode_address
seed_router
primary_port <port number>
primary_secret <string>
primary_server <IP_address or name>
retransmissions <count>
secondary_port <port number>
secondary_secret <string>
secondary_server <IP_address or name>
timeout <period>
type <nos | radius>
Configures remote (RADIUS) authentication for up to three servers. Use
show authentication command to check these values.
Description
Unique designation you assign for the AppleTalk
network that you want to configure. Limit: 32 ASCII
characters.
Enables the forwarder to learn hardware addresses
from the AARP packets it receives.
Designation of zone the router is advertised in.
Setting this parameter to TRUE results in checksums
being calculated on DDP packets. The checksum is used
to detect errors caused by faulty operation within
routers on the network.
Designation of the default zone for systems on this
network.
A description of the network. Limit: 32 ASCII
characters.
AppleTalk address used first when probing for an
AppleTalk address at the time the network is enabled.
TRUE enables the router to propagate seed (network
range, zones) data.
Set Commands 125