Quit Command; Reboot Command; Reconfigure Command; Reconfigure Ip Network <Network Name - 3Com 3C421600A Reference Manual

120 C 4: R
HAPTER OUTER

Quit Command

quit

Reboot Command

reboot
Reconfigure
Command
reconfigure ip
network <network
name>
C R
OMMAND EFERENCE
A ping with the verbose parameter selected displays the following:
PING Request: 1 Time (ms): 10
PING Request: 2 Time (ms): 0
PING Request: 3 Time (ms): 0
PING Request: 4 Time (ms): 0
PING Request: 5 Time (ms): 0
PING Request: 6 Time (ms): 0
PING Request: 7 Time (ms): 0
PING Request: 8 Time (ms): 0
PING Destination: camus
Status: ALIVE
Count:10
Timeouts Occured:0
Minimum Round Trip (ms):
Maximum Round Trip (ms):10
Average Round Trip (ms):1
Leave the CLI, but keep this connection open. This command returns you
to the Dial-In User or Telnet commands.
Reboots the system. If you have made any configuration changes, be sure
to issue the save all command before rebooting. Also see the
delete configuration command.
address <IP_address>
interface <rm0/eth:1>
frame <ethernet_ii | snap>
Automatically reconfigures IP network parameters of an established static
IP LAN network. This command changes network parameters without the
0