List Dns Servers; List Facilities; List Files; List Filters - 3Com 3C421600A Reference Manual

104 C 4: R
HAPTER OUTER

list dns servers

list facilities

list files

list filters

list init_scripts

C R
OMMAND EFERENCE
Type — DNS type of the Resource Record in the cache that is identified
in this row of the table.
DNS Servers.
Displays DNS Name Servers, which you configured using the add dns
server command. It lists the following:
Preference — Server priority for DNS service.
Name — Your name for the server.
Address — IP address of server.
Status — Current status (ACTIVE, INACTIVE).
Displays the system facilities (processes) currently running, plus the
default log level. This level is the severity of the error messages that are
displayed on the Console port. You can change the log level using the
set facility loglevel command. By comparison, syslog log levels
are specified by the set syslog <name> loglevel command.
Displays the files currently stored in the FLASH file system. You can
remove files using delete file, but you can add them using TFTP or
the Web configurator.
Displays all the filter names in the Filter Table, which you previously
defined using the add filter command. You can remove filters using
delete filter. The command lists the following:
Filter Name — Filter file name.
Status — Current status of the filter. The choices are the following:
Save — Filter file directed to be written to the current
configuration file
Saving — Filter file is being written to the new configuration file
Normal — Filter file has been written to the configuration file
Verify Failed — Filter verification failed
Protocols — Filter protocols supported: IP, IP-RIP, IP-CALL, IPX,
IPX-CALL, IPX-SAP, IPX-RIP, LOGIN-ACCESS.
Displays all the entries of Modem Initialization Table, which you previously
defined using add init script. Initialization scripts are assigned to