Set Snmp Community <Name - 3Com 3C421600A Reference Manual

set snmp community
<name>
Users who dial in and receive a compressed_analog connection (MNP5 or
V.42bis) do not receive PPP compression. Payload compression is set by
the parameter, not header compression as set for a user.
Parameter
system_dns_usage
nbns_primary
nbns_secondary
receive_authentication
access [ro | rw | adm]
address [IP_address]
Description
Enables/disables the RAS 1500 to supply clients with DNS
server addresses used in IPCP negotiation. Default: On.
IP address of the primary NetBIOS name server.
IP address of the secondary NetBIOS name server.
The authentication protocol the RAS 1500 uses to
authenticate its PPP peer (the peer can employ a protocol
of its choice). This value works in conjunction with
authentication_preference.
If the Any or Encrypted_any value is selected, the
authentication protocol tried first from the group can be
selected by specifying the authentication_preference
parameter. Note the following choices:
If receive_authentication is set to any,
authentication_preference can be set to Challenge
Handshake Authentication Protocol (CHAP), MS_chap,
EAP, proxy_eap, Password Authentication Protocol
(PAP), or default (CHAP).
If receive_authentication is set to any,
authentication_preference can be set to CHAP,
MS_chap, EAP, proxy_eap, or default (CHAP).
If receive_authentication is set to any other value, the
authentication_preference setting is ignored.
Protocols are negotiated in this order of preference:
CHAP, EAP, MS_chap, and PAP. Options are
following:
None — No user authentication requested.
PAP — Only Password Authentication Protoco allowed
with peer.
CHAP — Only CHAP (MD5) authentication allowed
with peer.
Either — Any authentication method can be used.
Set Commands 153
the