Chapter 11 System Maintenance & Information; 11.1 Command Interpreter Mode; Figure 11-2 Valid Commands - ZyXEL Communications Prestige 314 User Manual

System Maintenance & Information

11.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be entered
from the SMT by selecting menu 24.8. Access can be either by Telnet or by a serial connection to the console
port, although some commands are only available with a serial connection. See the included CD or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 - System
Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type
"exit" to return to the SMT main menu when finished.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
poe
hdap
ras>
System Maintenance & Information
Prestige 314 Broadband Sharing Gateway with 4-Port Switch
This chapter leads you through SMT menus 24.8 to 24.11.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Figure 11-1 Command Mode in Menu 24
exit device
pptp ip

Figure 11-2 Valid Commands

Chapter 11
ether
ppp
11-1