Figure 12-5 Adding/Editing Source And Destination Addresses; Table 12-4 Adding/Editing Source And Destination Addresses - ZyXEL Communications P-660H-61 User Manual

LABEL
Log This field determines if a log is created for packets that match the rule (Match), don't
match the rule (Not Match), match either rule (Both) or no log is created (None).
Alert Select the Alert check box to determine that this rule generates an alert when the rule is
matched.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the Prestige.
Click Cancel to exit this screen without saving.
Cancel
Delete Click Delete to remove the current rule.
12.6.1 Source and Destination Addresses
To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To
edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit
from the previous screen. Either action displays the following screen.

Figure 12-5 Adding/Editing Source and Destination Addresses

The following table describes the labels in this screen.

Table 12-4 Adding/Editing Source and Destination Addresses

LABEL
Address Type Do you want your rule to apply to packets with a particular (single) IP address, a
range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop-down list box that includes: Single Address,
Range Address, Subnet Address and Any Address.
Start IP Address Type the single IP address or the starting IP address in a range here.
End IP Address Type the ending IP address in a range here.
Subnet Mask Type the subnet mask here, if applicable.
Apply Click Apply to save your changes back to the Prestige.
Cancel Click Cancel to return to the previously saved settings.
Creating Custom Rules
Table 12-3 Creating/Editing A Firewall Rule
Prestige 660H Series User's Guide
DESCRIPTION
DESCRIPTION
12-9