To Prevent Calls From Individual Extensions Being Logged; To Set The Call Logging Interface Speed For Connecting A Printer Or Pc - BT Versatility Manual

BT Versatility
Owner's Manual

To prevent calls from individual Extensions being logged

If Call Logging is enabled, then by default all calls from all extensions will be logged. However
individual extensions can be programmed to prevent their calls being logged.
• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed.
• Select 'System programming'.
• Enter the System Programming Password and select 'Extensions'.
• Press the Scroll Down Key ( ) until 'No call logging' is displayed.
• Select 'No call logging'.
• Select the Extensions whose calls are not to be logged. The selected Extensions will be
indicated with a ♦.
Press the Hands-free Key to finish programming.

To set the call logging interface speed for connecting a Printer or PC

• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed.
• Select 'System programming'.
• Enter the System Programming Password and select 'System'.
• Press the Scroll Down Key ( ) until 'Set v24 baud rate' is displayed.
• Select 'Set v24 baud rate'.
• Select the speed you require – 4800, 9600,19,200, 38,400 or 115,200 bps.
Press the Hands-free Key to finish programming.
Note: To connect a printer or PC for call logging, use the call logging interface module and cable
provided and connect one end to the V24 interface on the CCU and the other end to the serial
device, e.g. a PC or a printer.
85