To Set The Display Contrast On Your Featurephone; To Enter System Programming - BT Versatility Manual

• From your Featurephone, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'Ringing options' is displayed.
• Select 'Ringing options'.
• Select 'Tone 1', 'Tone 2', 'Tone 3', 'Tone 4', 'Tone 5' or 'Tone 6' which will cause the
selected tone to sound.
• Select 'Confirm' to use the chosen tone. On the 'Display' 'Ring type set' will appear and
then the 'Display' will revert to the Idle Menu.
Press the Hands-free Key to finish programming.

To set the Display contrast on your Featurephone

You may choose from four levels of display contrast.
• From your Featurephone, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'Contrast options' is displayed.
• Select 'Contrast options'.
• Select 'Level 1', 'Level 2', 'Level 3' or 'Level 4' to set a contrast option. The prompt
'Contrast set' appears on the 'Display'.
Press the Hands-free Key to finish programming.

To enter system programming

If your Extension is the Programming Extension you have access to the system programming
options. If you select this option you will be prompted to enter the System Programming
Password. If this option is selected from any other Extension the 'Display' will show
'Programming Refused'. Again, the default Programming Extension is Extension 20.
• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed.
• Select 'System programming'.
• Enter the System Programming Password to access system programming.
information about system programming, see page 114.
BT Versatility
Owner's Manual
For more
48