Accessing System Programming Options - BT Versatility Manual

Accessing system programming options

System programming options can also be programmed via a standard system Featurephone.
However, the Featurephone must be connected to the extension that is programmed to be the
Programming Extension. By default, the Programming Extension is Extension 20.
You access all system programming options via the PROGRAMME Key on the Featurephone
connected to Programming Extension .
• From the Programming Extension, press the PROGRAMME Key
• Press the Scroll Down Key ( ) until 'System programming' is displayed. (The Scroll Up ( )
and Scroll Down ( ) Keys may be used to scroll between the various screens).
• Select 'System programming'. Selecting 'System programming' from any Extension other
than the programming Extension will result in the prompt 'Programming refused' being
displayed.
The following screen is displayed:
• Enter the System Programming Password, which is 1111 by default.
Note: You can also enter system programming by dialling ##1111 at the Programming Extension
and selecting 'Send digits'.
The following screen appears offering options to configure the overall system, the extensions, or
the Lines.
• Under 'System', you will find the programming options that affect the system as a whole.
• Under 'Extensions', you will find the programming options that affect the Extensions.
• Under 'Lines', you will find the programming options that affect the incoming Lines.
Enter system password
- Cancel
Select option
- System
- Extensions
- Lines
BT Versatility
Owner's Manual
116