Additional Functions - Bosch AutoCook MUC6 Series Instruction Manual

■ Automatic steam release can take some
time. In order to accelerate the process
or if the appliance is not completely
depressurised, the steam can also be
released manually. X "Release steam
manually" see page 19
8. Serve the prepared meal.
W Risk of scalding!
■ The pan and any inserts that are used
may be very hot. Always use suitable
handles or oven gloves.
Caution!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■ The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches
to function selection mode. Before the
appliance can be opened, the steam in
the appliance interior must be released
manually. X "Release steam manually"
see page 19
■ Certain preparation programmes
consist of several preparation steps.
X "Multiple preparation steps" see
page 20
Release steam manually
Steam can also be released manually in the
following cases:
■ If automatic steam release is to be
accelerated at the end of a preparation
programme.
■ If a preparation programme has been
aborted.
■ If the pressure locking handle cannot
be opened because the appliance is not
completely depressurised.
W Risk of scalding!
When pressing the steam release button,
hot steam escapes from the steam outlet
under high pressure. Never bend over the
appliance while the steam release button is
being pressed!

Additional functions

1. Keep the steam release button pressed
until no more steam escapes from the
steam outlet.
2. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
basic appliance.
Note: If the pressure locking handle cannot
be opened, the appliance is not completely
depressurised. In this case, manually
depress the overpressure protection using
a thin pin until no more steam escapes
from the appliance. Then open the pressure
locking handle (M) and press the opening
button on the basic appliance.
Additional functions
The following additional functions are
available for preparation programmes with
and without steam pressure function.
Selecting a pre-configured
preparation time
The pre-configured preparation time of the
level [ medium ] is shown on the control
panel for each preparation programme.
The preparation time can be shortened
[ short ] or lengthened [ long ].
en
19