Bosch AutoCook MUC6 Series Instruction Manual page 11

5. Remove the valve plug
Pull off the valve plug in the steam
release chamber.
6. Open the appliance lid
Open the pressure locking handle (M).
For this purpose, rotate the pressure
locking handle as far as possible in
an anti-clockwise direction. Press the
opening button on the basic appliance to
open the lid.
7. Lift the pan out of the appliance interior.
Before using for the first time
8. Remove the lid insert
Turn the fastening screw anti-clockwise
and remove it. Use one hand to keep the
lid insert in position on the inside of the lid.
Use the other hand on the outside of the
lid to push the steam valve in the steam
release chamber through the opening by
applying slight pressure. Carefully remove
the lid insert from the lid.
9. Remove the packaging material that is on
the appliance and the accessory parts.
10. Check all parts for completeness.
X Figure A
11. Check the appliance and the accessory
parts for visible damage.
Caution!
Never operate a damaged appliance!
12. Thoroughly clean and dry all parts
before using for the first time. X "Care
and daily cleaning" see page 25
13. Check safety devices
Lid insert: Check the sealing ring on
the lid insert for visible discolouration,
cracks or other damage.
Check that the safety and steam valve
as well as the overpressure protection
are clean. They must not be blocked
by foreign bodies. The overpressure
protection must be able to move freely.
Steam release chamber: Check the
steam valve seal in the steam release
chamber for visible discolouration,
cracks or other damage. Check that
the white steam release lever is clean.
It must not be blocked by foreign bodies.
en
11