Preparation - Bosch AutoCook MUC6 Series Instruction Manual

Preparation

General recommendations
For the best and tastiest results, we
recommend using the suggestions in our
recipe book, which was specially developed
for use with the appliance.
The recipe book features detailed
information on the required quantities
of ingredients, recommendations for the
preparation time and the preparation
temperature, use of the steam pressure
function and useful combinations of the
preparation programmes.
Use these recipe recommendations in
order to gain initial experience. Once you
appreciate the benefits and the variety
of the usage options, you will enjoy
experimenting with new recipes. Use the
individual setting options additionally offered
by the appliance. X "Customised setting
options" see page 22
To provide you with an overview of all
preparation programmes, we have compiled
this information in a clearly arranged table.
X "List of preparation programmes" see
page 26
W Risk of scalding!
■ Before using the appliance each time,
check that the safety devices are in
working order. X "Before using for the
first time" see page 10
■ During operation, the appliance must
never be used without the pan, lid insert,
valve plug and steam outlet inserted.
■ Never move the appliance during
operation.
■ Never use force to open the appliance!
W Risk of scalding!
Note the warning label on the power
cable:
Use the preparation programs only for the
intended and described food. X "Cooking
times" see page 28
To prevent the risk of scalding caused
by boiling or bubbling over, never use
high temperature programs (steam,
stew, fry, soft frying, baking, cooking) or
manual settings above 100°C to cook the
following foods: lentils, soy, liquids with a
high proportion of protein or starch (eg.
soup with beef), milk and similar liquids,
vegetables or other food combinations
prone to boiling or bubbling over.
Caution!
■ Use only the spatula provided for stirring
(do not use metal cutlery).
■ Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installation.
X "Before using for the first time" see
page 10
Preparation without steam
pressure
There are 16 pre-configured preparation
programmes available to choose from.
X "List of preparation programmes" see
page 26
Note: When selecting and starting the
preparation programme without the steam
pressure function, make sure that the
pressure locking handle is open at all
times (M).
Preparation en
13