Additional Functions - Bosch MUC6...RU Instruction Manual

en

Additional functions

■ If a preparation programme has been
aborted.
■ If the pressure locking handle cannot
be opened because the appliance is not
completely depressurised.
W Risk of scalding!
When pressing the steam release button,
hot steam escapes from the steam outlet
under high pressure. Never bend over the
appliance while the steam release button is
being pressed!
1. Keep the steam release button pressed
until no more steam escapes from the
steam outlet.
2. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
basic appliance.
Note: If the pressure locking handle cannot
be opened, the appliance is not completely
depressurised. In this case, manually
depress the overpressure protection using
a thin pin until no more steam escapes
from the appliance. Then open the pressure
locking handle (M) and press the opening
button on the basic appliance.
16
MUC6-8_RU_8001018000.indb 16
Additional functions
The following additional functions are
available for preparation programmes with
and without steam pressure function.
Selecting a pre-confi gured
preparation time
The pre-confi gured preparation time of
the level [ средняя ] (medium) is shown
on the control panel for each preparation
programme.
The preparation time can be shortened
[ короткая ] or lengthened [ длинная ].
1. Keep pressing button E until the
desired indicator is lit. The display
changes from [ средняя ] (medium)
to [ длинная ] (longer) and then to
[ короткая ] (shorter) before returning to
[ средняя ] (medium).
The corresponding pre-confi gured values for
the preparation time are shown in the display.
2. Press button G to start the preparation
programme.
Setting a start time delay
The start time delay can be set for the
selected preparation programme so you
can enjoy a freshly prepared meal at a
specifi c time.
Note: the start time delay can only be
set for certain preparation programmes.
The pre-confi gured start time delay varies
among these preparation programmes.
1. Select the preparation programme.
2. Press button A. Button G fl ashes.
"00:10" fl ashes in the display.
Press button A repeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button A for around 2 seconds
increases the time by 30 minutes.
3. Press button G when the desired start
time delay is displayed.
The desired start time delay is shown in
the display. [ таймер ] (timer) lights up in
the display. The time until the start counts
down. Once this time has elapsed, the
preparation process starts automatically.
07.03.2016 10:38:01