Before Using For The First Time - Bosch AutoCook MUC6 Series Instruction Manual

en

Before using for the first time

f Steam pressure function
[ K ] shows that low steam pressure
(105°C) is selected.
[ L ] shows that high steam pressure
(115°C) is selected. X "Preparation with
steam pressure" see page 16
g Display of the pre-configured
preparation time
The pre-configured preparation time
[ medium ] for a preparation programme
can be shortened [ short ] or lengthened
[ long ] using button E. The corre-
sponding indicator lights up.
h List of preparation programmes
There are 16 pre-configured preparation
programmes available. The individual
preparation programmes are displayed
one after another by repeatedly pressing
button D. The corresponding LED lights
up in the control panel.
i recipe 1&2
Memory locations to store individual
preparation programmes with steam
pressure function, preparation time and
temperature.
j my mode
Quick setting mode for customising the
steam pressure function, preparation time
and temperature for a cooking process.
10
Before using for the
first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
connected to the power outlet. To do this,
perform the following steps:
1. Remove the base unit and all
accessories from the packaging and
dispose of all packing materials.
2. Use the carrying handle to lift the
appliance. Swing the carrying handle
upwards accordingly.
Caution!
You should only use the carrying handle to
ensure safe transport of the appliance.
3. Place the appliance on a stable, level
and smooth work surface.
Caution!
There must be no sensitive surfaces and
appliances above and behind the appliance
that may be damaged by the temperature
development and the escaping steam.
4. Remove the steam outlet
Grip the steam outlet at the rear and pull
up and off.