Improving Adjustment Efficiency - Omron FZ3 Series User Manual

5.
Tap [OK].
The path and file name of the image are displayed under [Select image].
6.
Check "Measure using selected img (Re-meas.)".
7.
Tap [Measure] in the toolbar on the Main screen.
Measurement of the selected image is performed.
Note
About Auto Re-meas.
●
Displayed images can be automatically remeasured by placing a check in "Auto Re-meas.".
Important
When remeasuring an image with the controller, it is necessary to have a camera connected that is
●
appropriate to the image size.For example, if the image file for remeasurement contains 2 megapixel
images and a 0.3 megapixel camera is connected to the controller or if a camera is not connected,
measurement will not be performed correctly due to a memory deficiency.Perform remeasurement after
connecting a camera appropriate to the image size.

Improving Adjustment Efficiency

Convenient when measuring a large amount of image samples and classification or adjustment is
performed with each judgement.
Files in which NG error files and OK files are mixed can be continuously remeasured automatically, with
the system stopping at images with a specified condition (OK/NG) and these files being moved.
1.
In the Control area of the Main screen, tap [Test measurement].
2.
Place a check next to "Monitoring Judgement" and set the judgement conditions for
identification.
If the specified judgement condition is achieved when continuous measurement is performed,
measurement stops and the following message is displayed.
FZ3 User's Manual Useful Functions for Operation
3
77