Switching to the RUN Window
1.
Tap [Switch to RUN mode] in the ADJUST window.
3
Window switches to the RUN window.
Note
You can make settings so that the RUN window is displayed whenever power to the controller is turned on.
●
Reference:
Lighting gradually gets darker if it is used for a long time, so adjust judgement conditions periodically.
●
Without stopping a measurement in operation, you can change judgement conditions for a processing unit set
●
in a scene.
Reference:
Switching to the ADJUST Window
1.
Tap [Switch to ADJUST mode] in the RUN window tool box.
Switches to the ADJUST window.
62
ADJUST Window and RUN Window
Setting the Start-up Status [Startup Setting] (p.112)
Changing Judgement Conditions without Stopping Measurement (p.79)
FZ3 User's Manual