Omron FZ3 Series User Manual page 150

Important
Before setting the communication specifications, set the "Serial (RS-232C/422)" communication module to
●
either "Normal" or "Normal (Fxxx series method)", store to the controller, then restart the system.
Reference:
Use the same communication specification settings for the controller and the external device.
●
Note
During setting of communication specifications, input signals cannot be handled.However, the input status can
●
be checked with [Confirmation].
Reference:
When data is output via serial communication, output is suspended while communication specifications are
●
being set.
1.
On the Main screen, tap the [System] menu - [Communication] - [Serial] - [RS-232C/422].
The Serial window is displayed.
2.
Tap [Setting] to set communication specifications.
6
Item
Interface
Baud rate
[bps]
[Note 1]
148 Controlling/Outputting through Serial Communication (Non-procedure)
Setting the Start-up Status [Startup Setting] (p.112)
Checking Communication Status (Non-procedure) (p.149)
Set value
[Factory default]
[RS-232C]
●
Adjust to the PC communication specifications.
RS-422
●
2400
●
4800
●
9600
●
19200 Adjust to the PC communication specifications.
●
[38400]
●
57600
●
115200
●
Description
FZ3 User's Manual