2D Code - Omron FZ3 Series User Manual

136
137
162
163
164
300 to 335
400
401
7
402
403

2D Code+

No.
0
6
7
8
9
10
11
12
13
14
15
16
103
120
121
228 Measurement
Check digit Set/Get
Number of characters
Set/Get
detected setting
Upper limit of number
Set/Get
of characters detected
Lower limit of number
Set/Get
of characters detected
Judgement
comparison character Set/Get
string
Classification
comparison character Set/Get
string
Character output flag Set/Get
Output device Set/Get
Error output Set/Get
Error message Set/Get
Data name
Judge
Decoded character count
Decoded character string
Index
Integrated quality
Contrast
Modulation
Fixed pattern damage
Decode
Axis non-uniformity
Grid non-uniformity
Correction of error not used
Reflect to overall judgement
Code type
Flag used for special character
judgement
0: Check digit is not used
1: Check digit is used
CHAR_NUM_MIN to CHAR_NUM_MAX
0 to CHAR_NUM_MAX
0 to CHAR_NUM_MAX
Comparison string used for judgement
Verification string used for classification
0: Not output
1 : Output
0: RS-232C
1: Ethernet
Error output flag
Message output while outputting an error
Set/Get
0: No judgement (unmeasured)
Get only 1: Judgement result OK
-1: Judgement result NG
Number of characters included in code
Get only
detected
Get only Character string included in code detected
0 to (INDEX_NUM_MAX - 1)
-1: Where there was no match with any of
Get only
the index comparison strings,or the index
comparison string has not been set up.
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
Get only 0 to 4
0: ON
Set/Get
1: OFF
0:Data Matrix ECC 200
Set/Get
1:QRcode
0: '*"? are considered to be wild cards
Set/Get 1: '*"? are considered to be character
strings
Data range
FZ3 User's Manual