Omron FZ3 Series User Manual page 53

2.
Tap [Switch] for the scene group.
The Switch Scene Group window is displayed.
3.
Switch to the scene group to edit.
1.
Tap [ ] and select the scene group to edit.
2.
Select whether a scene group should be saved when switching to another scene group.
Setting item
Save scene
group on
switch scene
Note
The setting for whether to save a scene group during switching is linked to the settings of the
●
Measurement Setting window.
Reference: Setting Conditions Related to Operation during Measurement (p.108)
3.
Tap [OK].
The scene group is switched and the screen returns to the Scene Maintenance window.
Important
When a check is inserted in "Save scene group on switch scene", data may be lost if the power is cut off
●
during scene group switching.During scene group switching, make sure that the power is not cut off.
FZ3 User's Manual
Setting
value
[Factory
default]
When the scene group is switched, the data of the
[Checked]
scene group before switching is saved.
The scene group data is not saved when switching to
Unchecked another scene group. Therefore, the switching period
can be shortened.
Description
Switching Scenes and Scene Groups
2
51