Omron FZ3 Series User Manual page 162

<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
6
Note
About "Normal (Fxxx series method)"
●
Reference:
<Parameters explanation>
Measurement
result
Starts continuous measurement
Starts continuous measurement.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
160 Controlling/Outputting through Serial Communication (Non-procedure)
Normal
Setting the Start-up Status [Startup Setting] (p.112)
When "Data Output" is set in the flow, the measurement results are output.
When "Data Output" is not set, the measurement results are not output.
Reference: Output Format (Non-procedure) (p.176)
Normal (Fxxx series)
FZ3 User's Manual