Table of Contents
Advertisement
Note
The output signal functions the same as when "Output Control" is set to "None".
●
Reference:
When "Output Control" Is Set to "None" (p.184)
Scene/Scene Group Switch
Output signal
Signal
Turns on when the controller is available for measurement and the RUN window is displayed. Turns
RUN
off in the ADJUST window.
Indicates that the controller is currently switching the scene or scene group. Do not input next
BUSY
command while the BUSY signal is ON. Otherwise, on-going processing or commands that are
input will not be performed correctly.
FZ3 User's Manual
Function
Controlling/Outputting through Parallel Communication
6
189
Advertisement
Table of Contents
