Omron FZ3 Series User Manual page 18

1
●
●
●
●
●
●
●
●
●
●
●
●
●
e.
Display Options
●
●
●
●
f.
Processing Item Tree
This area is for selecting processing items to add to the flow.Processing items are classified by
type and displayed as a tree. Tapping the plus sign "+" of any item displays expanded contents
16 Layouts of Screens/Windows
Searching can be performed to find out what position a processing item occupies in the
unit list.
The icon for the processing item to be searched for is selected in the processing item tree
and clicked.
This function is convenient when setting long flows.
Select top/Select bottom
Selects the processing unit at the top or bottom of the flow.
Select above/Select below
Selects the processing unit located one above or one below the currently selected
processing unit.
Rename
Displays a window for renaming the selected processing unit.
Move up/Move down
Moves the selected processing unit upward or downward.
Copy
Copies the selected processing unit.
Paste
Pastes the copied processing unit immediately before the selected processing unit.Pasting
cannot be performed if any operations other than paste are performed after copying.
Delete
Deletes the selected processing unit.
Append (Bottom)
Adds a processing unit to the bottom of the flow.
Insert
Inserts a new processing unit immediately before the selected processing unit.
New folder
Used when multiple processing units are managed as one group.
Shift area
Changes related figure data in one batch.
Multiple selection
Used when processing units are copied or deleted together.
Set
Displays the processing item setting window for the selected processing unit.
Show guide
When checked, explanations for processing items are displayed.
Enlarge flow
When checked, the "a Unit list" flow is displayed with large icons.
Enlarge item tree
When checked, the "f Processing item tree" is displayed with large icons.
Ref. other Scene's flow
When checked, other scene flows within the same scene group can be referred to.
FZ3 User's Manual