Omron FZ3 Series User Manual page 127

Default
gateway
DNS server
Input/Output setting
Input mode
Input form
Output IP
address
Input/Output
port No.
3.
Tap [PLC Link].
The PLC Link Setting window is displayed.
4.
Set the following items.
FZ3 User's Manual
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the default gateway address.
c: 0 to 255
d: 0 to 255
[10.5.5.110]
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the DNS server address.
c: 0 to 255
d: 0 to 255
[10.5.5.1]
[Normal] This item cannot be changed.
[ASCII] This item cannot be changed.
a.b.c.d
a: 1 to 225
b: 0 to 255
Input the output destination IP address.
c: 0 to 255
d: 0 to 255
[0.0.0.0]
0 to 65535 Set the port No. to use for data I/O with the
[9600] controller.
Communicating through Serial Communication (PLC Link)
6
125